力量感測器,solutions_01

Capacitive 6-axis force sensor (200N)

Dyn Pick is a capacitive force sensor that can detect forces (Fx, Fy, Fz, Mx, My, and Mz) in six directions simultaneously. Assuming various applications, this WEF-6A series has a waterproof and dustproof structure (IP65) as a standard.

Capacitive 6-axis force sensor (500N)

The Dyn Pick WEF-6A500-10 series is a 6-axis force sensor the rated loads of which are 500N on Fx, Fy, Fz and 10Nm on Mx, My, Mz. While the outer dimensions are the same as WEF-6A200-4, the internal structure is uniquely designed to increase the rated loads 2.5 times. This product is typically intended for industrial applications with fewer restrictions in the design and weight of an end effector, etc., attached to the tip of the sensor.

Capacitive 6-axis force sensor (1000N)

The Dyn Pick WEF-6A1000-30 series is a 6-axis force sensor the rated loads of which are 1000N on Fx, Fy, Fz and 30Nm on Mx, My, Mz. While the outer dimensions are φ90 x H40mm due to the large rated loads, the mounting screws and pinholes are the same in shape as WEF-6A200-4 and WEF-6A500-10 to facilitate its use. The WEF-6A1000-30 of these rated loads is a product that can be used for industrial robots with a large weight capacity.

Miniature capacitive 6-axis force sensor

The Dyn Pick Model WDF-6M200-3 is a miniature force sensor that is widely used by research institutions and universities. For miniaturization, the microcomputer adopted in the sensor has been made smaller than Dyn Pick, and also WACOH-TECH’s original stopper mechanism has been simplified.

Capacitive 6-axis force sensor (including Ethernet)

The Dyn Pick Model WEF-6A200-4-ECP is capable of IP65 and incorporates the stopper mechanism and correcting microcomputer as in the case of the standard Dyn Pick. While RS422 would conventionally be converted to Ethernet by an external box, the greatest advantage of this 6-axis force sensor is that it can operate on PoE, including Ethernet ( TCP/IP).